Pg 1 || Pg 2 || Pg 3 || Pg 4 || Pg 5 || Pg 6 || Pg 7 || Pg 8 || Pg 9 || Pg 10 || Pg 11 || Pg 12 || Pg 13 || Pg 14 || Pg 15 || Pg 16 || Pg 17 || Pg 18 || Pg 19 || Pg 20 || Pg 21 || Pg 22 || Pg 23 || Pg 24 || Pg 25 || Pg 26 || Pg 27 || Pg 28 || Pg 29 || Pg 30 || Pg 31 || Pg 32 || Pg 33 || Pg 34 || Pg 35 || Pg 36 || Pg 37 || Pg 38 || Pg 39 ||

	This was one of the first things I saw at the 2004 MI Buggy Show 2-22-04. As I went on, I thought that would be it for ultralites.
	I met up with Odyknuck, who came to help his friend check out this buggy.
	Another view
	Back inside, I leave Steve to dig through the bins looking for odds and ends for his sand rail, and come across the MI Sand Cars booth. Beautiful, but I don't have Oprah money.
	Oh, yeah!
	And then I see it from a ways off. It looks the right size. As I get to it, I realize it is. East Side Fabrication makes it. Now this is more like it! It was tough it get good pictures because of the crowds around it.
	A shot of the rear suspention shows that this is an unfinished prototype. The final drive is to be to a CVT to a jack shaft, with a chain drive to the axle. That's right, no reverse.
	A rolling chassis can be bought for $6750. They had a 20 hp Kawasaki water cooled 4 stroke that they plan to sell turnkey for $12,000. He says he can get a 29hp version. He was told that opening up the intake can add some more power.

Pg 1 || Pg 2 || Pg 3 || Pg 4 || Pg 5 || Pg 6 || Pg 7 || Pg 8 || Pg 9 || Pg 10 || Pg 11 || Pg 12 || Pg 13 || Pg 14 || Pg 15 || Pg 16 || Pg 17 || Pg 18 || Pg 19 || Pg 20 || Pg 21 || Pg 22 || Pg 23 || Pg 24 || Pg 25 || Pg 26 || Pg 27 || Pg 28 || Pg 29 || Pg 30 || Pg 31 || Pg 32 || Pg 33 || Pg 34 || Pg 35 || Pg 36 || Pg 37 || Pg 38 || Pg 39 ||